Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC627E
48 Operating Instructions, 12/2018, A5E44297201-AA
Requirements
● You have observed the information under "Country-specific information on supply voltage
(Page 45)".
● Screwdriver T10
Procedure
1. Make sure that the ON/OFF switch is in position '-' (Off) to avoid unintentional startup of
the device when you plug in the power cord.
2. Connect the appliance connector to the device.
3. If necessary, install the enclosed cable grip.
4. Connect the power cable with the safety power outlet.
To Next Page
Loading...
Need help?
General
