Siemens SIMATIC MOBY D - Technical Data

Mobile data storage units
5.9 MDS D261
MOBY D
130 System Manual, 01/2010, J31069-D0147-A6-7618
5.9.3 Technical data
Memory configuration
 Serial number
 AFI/DSFID
 Application memory
 8 bytes (fixed code)
 2 bytes
 256 bytes
Storage technology EEPROM
Memory organization 4 bytes, block by block
Protocol according to ISO 15693
Data transmission rate
 reading
 writing
 approx. 3.5 ms/byte
 approx. 9.5 ms/byte
Multitag capability Yes
Data retention 10 years
Read cycles
Write cycles, min.
Unlimited
100 000
Recommended distance to metal 25 mm (approx. 30% reduction of the field data)
Power supply Inductive power transmission (without battery)
Typical read/write distance See Chapter Field data (Page 33)
Degree of protection according to EN 60529 IP65
Dimensions
 L x W (in mm)
 Height
 55 x 55
 approx. 0.3 mm
Material
 Top
 Inlay
 Antenna
 Bottom
 PET plastic (label material)
 PET plastic (carrier material)
 Aluminum
 Double-sided transfer adhesive on silicon
paper
Color White
Mounting Single-sided adhesive (self-adhesive label)
Imprinting Yes (heat transfer method)
 Ambient temperature during operation
 Storage temperature
 -25 °C to +85 °C
 +20 °C to +30 °C (the storage period is 2
years, determined by durability of the
adhesive)
Type of delivery Minimum order quantity 1250 units
(5 rolls with 250 units each)