Siemens SIMATIC MOBY D - Technical Data

Write/read devices with RS232 interface
6.4 SLG D12
MOBY D
162 System Manual, 01/2010, J31069-D0147-A6-7618
6.4.3 Technical data
Table 6- 11 Technical data for SLG D12
Inductive interface to the MDS
Transmission frequency 13.56 MHz
Transponders supported Transponders according to ISO 15693 and I-Code1
Serial interface to the user RS 232
Transmission protocol Asynchronous 8 bit
Data transmission rate 9600 baud to 38.4 Kbaud (adjustable)
Data backup CRC 16
Transmit power 1 W
Write/read distances SLG - MDS 160 mm typically (see field data)
Software functions Read, write, initialize MDS, access rights, multitag
Programming Windows 9x, 2000, NT and XP with 32 bit DLL available
Multitag Yes
Anti-collision speed approx. 20 labels/s simultaneously identifiable
Power supply
 Rated value
 Permissible range

'&9

'&9s8/RQO\
'&99
Current consumption
 Operation
 Inrush current, momentary
 150 mA
 600 mA
Cable length SLG – PC with RS 232 30 m
Digital inputs/outputs None
Enclosure dimensions (L x W x H) in
mm
160 x 80 x 40 (without connector)
Color Anthracite
Material Plastic PA 12
Connector
 V24 interface
 Power supply
 9-pin Sub-D connector (male)
 4-pin M12 connector (male)
Mounting 2 x M5 screws
Ambient temperature
 Operation
 Transport and storage
 -25 °C to +55 °C
 -25 °C to +70 °C
MTBF 2.0 x 10
5
hours
Degree of protection according to EN
60529
IP65 (UL: for indoor use only)
Shock resistant according to EN
60721-3-7 Class 7M2
Total shock response spectrum Type II
30 g
Vibration according to EN 60721-3-7
Class 7M2
1 g (9 to 200 Hz)/1.5 g (200 to 500 Hz)