Siemens SIMATIC PCS 7 Operating Instructions

Convention: In the following, the designation IM 650 is used in the operating instructions for the
650-8PH interface module.
For new versions of the ET 200PA SMART components, we reserve the right to enclose
product information containing current information about the respective module or the
operating instructions.
This product information can also be found on the Internet (http://
support.automation.siemens.com). Search there for "ET 200PA SMART", for example.
Approvals, standards and certificates
See section "Standards and approvals (Page 211)."
Position in the Information Landscape
This manual contains a complete description of the ET 200PA SMART Distributed I/O system.
If you are using I/O modules from the S7-300 series of modules, you can find information on
them in the following manuals:
Manual Contents
Automation System S7-300, Module Data (http://
support.automation.siemens.com/WW/view/en/
8859629)
● General technical specifications
● Power supply modules
● Digital modules
● Analog modules
● Order numbers for S7‑300
ET 200M Signal Modules for Process Automation
(http://support.automation.siemens.com/WW/view/en/
7215812)
● Overview of the use in process automation
● Parameter assignment with SIMATIC PDM
● Digital input module
● Digital output module
ET 200M Distributed I/O Device HART Analog Modules
(http://support.automation.siemens.com/WW/view/en/
22063748)
● HART analog modules
● Expanded input data (HART auxiliary variables)
SIMATIC S7-300 Product Information for Digital Input
Module SM 321; DI 64 x DC 24 V, Sinking/Sourcing;
(6ES7321-1BP00-0AA0)
SIMATIC S7-300 Product Information for Digital Input
Module SM 321; DI 64 x DC 24 V, Sinking/Sourcing
● 64-channel digital input/output modules
SIMATIC Automation System S7-300, ET 200M EX I/O
Modules
● Fundamental guidelines and specifications
● Configuration specifications
● Ex I/O modules including Ex HART analog modules
The ET 200PA SMART Distributed I/O system can only be operated on a CPU 410.
Therefore, you also need the manual of the utilized CPU 410.
Manual Contents
CPU 410-5H Process Automation
CPU 410-5H Process Automation/CPU 410 SMART
● Configuring and commissioning a DP master system
● Description of the DP master
Preface
ET 200PA SMART
4 Operating Instructions, 06/2019, A5E34192013-AB

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English