Technical specifications
16.1 Standards and Approvals
S7-1500R/H redundant system
486 System Manual, 01/2024, A5E41814787-AF
PROFINET standard
The PROFINET interfaces of the redundant S7-1500R/H system are based on the standard
IEC 61158 Type 10.
Marine approval
Classification societies:
• ABS (American Bureau of Shipping)
• BV (Bureau Veritas - French marine classification society)
• DNV (Det Norske Veritas)
• LRS (Lloyds Register of Shipping)
• Class NK (Nippon Kaiji Kyokai)
• KR (Korean Register of Shipping)
• CCS (China Classification Society)
• RINA (Registro Italiano Navale)
Industrial use
The S7-1500R/H redundant system is designed for use in industrial environments. It meets
the following standards for this type of use:
• Emission requirements EN IEC 61000-6-4: 2019
• Immunity requirements EN IEC 61000-6-2: 2019
Use in mixed areas
Under certain circumstances, you can use the S7-1500R/H redundant system in a mixed area.
A mixed area is used for residential purposes and for commercial operations that do not
significantly impact on residents.
If you use the S7-1500R/H redundant system in a mixed area, you must ensure that radio
interference emission complies with the limit classes of the technical standard EN 61000-6-3.
Suitable measures for observing these limits for use in a mixed area are, for example:
• Installation of the S7-1500R/H redundant system in grounded control cabinets
• Use of noise filters in the supply cables
An individual acceptance test is also required.
Use in residential areas
-1500R/H redundant system not intended for use in residential areas
-1500R/H redundant system is not intended for use in residential areas. Using the S7-
1500R/H redundant system in residential areas can affect radio and television reception.
To Next Page
Loading...
Need help?
General
