Siemens Simatic S7-400 - Page 332

Setting/changing the number
Proceed as follows:
1. Set the switch of the power supply module in the EU in which you want to make the change
to the
position (Output voltage 0 V).
2. Enter the number using the DIP switch.
3. Switch the power supply module on again.
Specifications of the IM 460-0 and IM 461-0
Maximum line length (total) 5 m
Abmessungen B x H x T (mm) 25 x 290 x 280
Weight
● IM 460-0
● IM 461-0
600 g
610 g
Current consumption from the
S7-400 bus 5 VDC
● IM 460-0
Typ. 130 mA
Max. 140 mA
● IM 461-0
Typ. 260 mA
Max. 290 mA
Power loss
● IM 460-0
Typ. 650 mW
Max. 700 mW
● IM 461-0
Typ. 1300 mW
Max. 1450 mW
Terminator 6ES7461-0AA00-7AA0
Backup current None
Interface modules
6.2 Interface modules IM 460-0 (6ES7 460-0AA01-0AB0) and IM 461-0 (6ES7 461-0AA01-0AA0)
S7-400 Automation System Module Data
332 Reference Manual, Ausgabe 11/2016, A5E00850736-08