Siemens Simatic S7-400

7.6 Configuring S5 modules for operation in the S7-400
Example
You program S5 modules in
STEP 7 . Refer to the description in the STEP 7 manual or the
online help to learn how this is done.
The following figure shows a possible connection of CRs and EUs via the IM 463-2 and IM
314.
S5 interface IM 463-2
7.6 Configuring S5 modules for operation in the S7-400
S7-400 Automation System Module Data
Reference Manual, Ausgabe 11/2016, A5E00850736-08 355