5.26.2 Commissioning the SM 432; AO 8 x 13 Bit
Parameters
You will find a description of the general procedure for assigning parameters to analog modules
in the respective sections.
For an overview of configurable parameters and defaults, refer to the "Parameters of analog
output modules" table.
Assigning parameters to channels
The parameters can be set separately at each output channel of SM 432; AO 8 x 13 Bit. You
can thus assign individual parameters to each output channel.
See also
General information about parameter assignment (Page 199)
Analog modules
5.26 Analog output module SM 432; AO 8 x 13 Bit (6ES7432-1HF00-0AB0)
S7-400 Automation System Module Data
322 Reference Manual, Ausgabe 11/2016, A5E00850736-08
To Next Page
Loading...
