Siemens Simatic S7-400

8.4.2 Specifications of the IM 467 FO (6ES7467-5FJ00-0AB0)
Dimensions and weight
Dimensions W x H x D (mm)
Weight
25 x 290 x 210
700 g
PROFIBUS DP
● Standard
PROFIBUS DP, EN 50 170
● Transmission rate
9.6 Kbps to 12 Mbps, configurable in
steps (3 Mbps and 6 Mbps not possi‐
ble)
● Transmission technology
FOC;
Wave length l = 660 nm 2 x duplex
sockets
Current consumption
Current consumption from the S7-400 bus (24 VDC)
The IM does not consume any current at 24 V, and it only makes
this voltage available at the MPI/DP interface.
Total current consumption of the com‐
ponents connected to the DP interfa‐
ces, with a maximum of 150 mA
PROFIBUS DP
Operating conditions
Can be used in SIMATIC S7-400, max. 4 IM 467 in
the central rack
IM 467 cannot be used with the CP 443-5
Supply voltage 5 VDC via the backplane bus
Current consumption 1.3 A
● From 5 VDC
Addressing range Max. 4 KB for inputs and 4 KB for out‐
puts
DP master Yes
● DPV 1
No
● Enable/disable
No
Number of connectable I/O devices (slaves) 96
Number of connections for S7 functions for the programming
device and operator control and monitoring
32 + 1 diagnostic connection
Data volume per slave Max. 244 bytes
Consistency Max. 128 bytes
Configuration software STEP 7
DP slave No
Deviations from the DP interface integrated in the CPU
● Different SSL IDs for system diagnostics
● Possibly extended SFC run times
● Additional return codes for SFC 14 and SFC 15
PROFIBUS DP master interface IM 467/IM 467 FO
8.4 Specifications
S7-400 Automation System Module Data
376 Reference Manual, Ausgabe 11/2016, A5E00850736-08