Default
The default settings of the module in STEP 7 are "Thermocouple (linear)" for the measuring
method and "Type J" for the measuring range. You can use this combination of measuring
method and measuring range without configuring the SM 431; AI 8 x 16 Bit in STEP 7.
5.26 Analog output module SM 432; AO 8 x 13 Bit (6ES7432-1HF00-0AB0)
5.26.1 Features
Overview
SM 432; AO 8 x 13 bit has the following properties:
● 8 outputs
● the output can be selected for each channel as
– Voltage output
– current output
● Resolution 13 bits
● Analog section potential-free relative to CPU and load voltage
● Maximum permissible common mode voltage between the channels or between channels
and M
ANA
3 V DC
Analog modules
5.26 Analog output module SM 432; AO 8 x 13 Bit (6ES7432-1HF00-0AB0)
S7-400 Automation System Module Data
316 Reference Manual, Ausgabe 11/2016, A5E00850736-08
To Next Page
Loading...
