Description of the parameters
The next chapters describe all modifiable parameters of the various module classes. The
parameters of the signal modules are described:
● In the online help of STEP 7
● In this reference manual
The sections dealing with the various signal modules also show you the corresponding
configurable parameters.
Further references
An in-depth description of the principle of assigning parameters to signal modules in the user
program and a description of the SFCs that can be used for that purpose will be found in the
STEP 7 manuals.
Parameter sets of signal modules
A.1 How to assign the parameters for signal modules in the user program
S7-400 Automation System Module Data
396 Reference Manual, Ausgabe 11/2016, A5E00850736-08
To Next Page
Loading...
