Siemens SIMOCODE pro PCS 7

Parameter
A.4 Block parameter MMMeas
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
257
Parameter
Data format
Default setting
Meaning
TripTime STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Time Until Tripping [sec]
MotcolTm STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Remaining cool down time of the motor in sec
MotVol1 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Motor Voltage UL1 in Volt
MotVol2 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Motor Voltage UL2 in Volt
MotVol3 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Motor Voltage UL3 in Volt
AMOut STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog output
AMOutE STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog Output Effective in mA
AMIn1 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog input 1
AMIn1E STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog Input 1 Effective in mA
AMIn2 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog input 2
AMIn2E STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog Input 2 Effective in mA
AMIn3 STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog input 3