Commissioning
4.3 Creating a project
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
57
Opening an existing project
If you wish to change the data of an existing project, then you can load this project at any
time.
1. Click on "Open existing project" in the secondary navigation in the Portal view of
Startdrive.
A selection of the projects last used is displayed to the right in the detailed view.
Figure 4-3 Opening an existing project
2. Select the required project from the list, and then click on "Open".
- or -
To Next Page
Loading...
