Need help?Do you have a question about the Siemens SINAMICS V10 and is the answer not in the manual?
General| Control Method | V/f control |
|---|---|
| Degree of protection | IP20 |
| Relative Humidity | 5 % to 95 % (non-condensing) |
| Altitude | Up to 1000 m above sea level without derating |
| Frequency | 50 Hz / 60 Hz |
| Protection | Overcurrent, overvoltage, undervoltage, overload, short circuit, ground fault |
| Communication | RS485 |
| Operating Temperature | -10°C to +50°C |
| Power Range | 0.37 kW to 4 kW |
| Storage Temperature | +70 °C |
| Input Voltage | 1-phase: 200-240V AC, 3-phase: 380-480V AC |
To Next Page