Display Example Meaning Remarks
oCxx Selected connection macro -
oAxx Selected application macro -
Cxxxx Selected connection macro and
application macro
As described in the example, "01" represents
"C01", while "00" represents "A00".
Pxxxx Parameter no. (Settable parameter)
P.xxxx Parameter no. (Settable parameter) This kind of parameters with a dot is only available
in quick motor data setting mode.
(For details, see "Notice" in Section 6.2.2.3)
rxxxx Parameter no. (Read-only parameter)
Fxxxx Fault code (in case of a single fault)
x.Fxxx Fault code of the 1st fault (in case of
multiple faults)
The inverter can display up to 4 recently occurred
faults in turn.
Fault code of the 2nd fault (in case of
multiple faults)
Axxxx Alarm code (in case of a single alarm)
x.Axxx Alarm code of the 1st alarm (in case of
multiple alarms)
The inverter can display up to 4 recently occurred
alarms in turn.
Alarm code of the 2nd alarm (in case
of multiple alarms)
Err- - Value setting impossible
- - - - -
- - - - -
Error parameter editing It's a warning indicating that what you're trying to
edit is a read-only parameter and such editing is
not allowed.
xxx. xx Parameter value, positive Display a positive value of 5 digits at most.
-xxx.xx Parameter value, negative Display a negative value of 5 digits at most.
inxxx Indexed parameter The figure after "in" indicates the number of
indices. For example, "In013" means that this
indexed parameter has 13 indices.
bxxxx See figure
below
Binary parameter Meaning of each segment bit is described in
individual parameters concerned.
To Next Page
Loading...
