Siemens SINAMICS V10 - Available Options and Accessories

Rating plate on the rear of the operator panel
Rating plate on the rear of the operator panel
Product serial number
Hardware version
Firmware version
Siemens part number
6,1$0,&692SHUDWRU3DQHO
9(56,21$
6=9:2<9&
61&$(
0DGHLQ&KLQD
):9
Figure 4-3 The operator panel rating plate
Note
Beside operator panel rating plate, there is a small label. This label indicates the firmware
version of the operator panel.
Options
Option Variant MLFB (order number)
Push-through mounting components
The push-through mounting components include:
● Push-through mounting kit (1 set)
2)
● Production Information Sheet (1 piece)
● Plastic rivets (2 pieces)
● Metal back cover (1 piece)
3)
● Mounting screws:
– Frame Size A: 4 x M5 screws
– Frame Size B: 4 x M5 screws
– Frame Size C: 8 x M5 screws
– Frame Size D: 8 x M5 screws + 4 x M8 screws
● Mounting nuts
– Frame Size A: 4 x M5 nuts
– Frame Size B: 4 x M5 nuts
– Frame Size C: 8 x M5 nuts
– Frame Size D: 8 x M5 nuts + 4 x M8 nuts
Frame Size A specific 6SL3261-6AA00-0VA0
Frame Size B specific 6SL3261-6AB00-0VA0
Frame Size C specific 6SL3261-6AC00-0VA0
Frame Size D specific 6SL3261-6AD00-0VA0
(6-hole, for Frame Size A)
(6-hole, for Frame Size B)
(10-hole, for Frame Size C)
(14-hole, for Frame Size D)
Push-through mounting kit variants
Identification
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number) 17