Table 7-3 Digital I/O specific parameters
Parameter No. Name
P0701 Function of digital input 1
P0702 Function of digital input 2
P0703 Function of digital input 3
r0722 Binary input values
P0725 PNP/NPN digital inputs
P0731 Function of digital output 1
P0748 Invert digital outputs
Table 7-4 Analog I/O specific parameters
Parameter No. Name
P0753 Smooth time ADC
P0757 Value x1 of ADC scaling
P0758 Value y1 of ADC scaling
P0759 Value x2 of ADC scaling
P0760 Value y2 of ADC scaling
P0761 Width of ADC deadband
P0771 DAC
P0773 Smooth time DAC
P0777 Value x1 of DAC scaling
P0778 Value y1 of DAC scaling
P0779 Value x2 of DAC scaling
P0780 Value y2 of DAC scaling
P0781 Width of DAC deadband
Table 7-5 Frequency reference specific parameters
Parameter No. Name
P1040 Setpoint of the MOP
P1000 Selection of freq. setpoint
P1074 Disabling an additional setpoint
P1020 Fixed frequency selection 1
P1021 Fixed frequency selection 2
P1001 Fixed frequency 1
P1002 Fixed frequency 2
P1003 Fixed frequency 3
P1031 Setpoint memory of the MOP
P1058 JOG frequency right
P1059 JOG frequency left
P1080 Min. frequency
P1082 Max. frequency
P1110 Inhibit neg. freq. setpoint
Parameter list
SINAMICS V10
76 Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
To Next Page
Loading...
