Siemens SINAMICS V10 User Manual

Description
3
Overview
The SINAMICS V10 inverters are designed for controlling the speed of three phrase AC
asynchronous squirrel cage motors. The available inverter versions range from the 0.55 kW
three phase output power to the 22 kW three phase output power.
The inverters are microprocessor-controlled and use state-of-the-art IGBT technology. A
special pulse-width modulation method with selectable pulse frequency permits quiet motor
operation. Comprehensive protective functions provide excellent inverter and motor protection.
SINAMICS V10 with its default factory settings is ideal for a large range of simple motor control
applications. By configuring relevant parameters, you can use the inverter for some advanced
motor control operations. In addition, the SINAMICS V10 inverters are also suitable for use in
"stand-alone" applications or being integrated into "Automation Systems" via input/output
signals.
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number) 13

Siemens SINAMICS V10 Specifications

General

Control Method	V/f control
Degree of protection	IP20
Relative Humidity	5 % to 95 % (non-condensing)
Altitude	Up to 1000 m above sea level without derating
Frequency	50 Hz / 60 Hz
Protection	Overcurrent, overvoltage, undervoltage, overload, short circuit, ground fault
Communication	RS485
Operating Temperature	-10°C to +50°C
Power Range	0.37 kW to 4 kW
Storage Temperature	+70 °C
Input Voltage	1-phase: 200-240V AC, 3-phase: 380-480V AC