Connection macros dependent default settings
For some parameters, its default value depends on connection macro selected.
Table 7-10 Connection macros dependent default settings
r0007 P0610 P0701 P0702 P0703 P0725 P1000 P2280 P2285 P2293
C01 C01xx* 1 0 0 0 1 5 3.000 0.000 1.00
C02 C02xx 2 13 14 1 1 1 3.000 0.000 1.00
C03 C03xx 2 1 0 0 1 2 3.000 0.000 1.00
C04 C04xx 2 1 12 0 1 2 3.000 0.000 1.00
C05 C05xx 1 99 1 0 1 2 3.000 0.000 1.00
C06 C06xx 2 1 15 15 1 3 3.000 0.000 1.00
C07 C07xx 2 1 2 0 1 2 3.000 0.000 1.00
C08 C08xx 2 1 2 0 0 2 3.000 0.000 1.00
C09 C09xx 2 1 10 11 1 2 3.000 0.000 1.00
C10 C10xx 2 1 13 14 1 1 0.500 10.000 10.00
C11 C11xx 2 1 12 9 1 5 3.000 0.000 1.00
* 'xx' means current application macro.
Parameter list
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number) 105
To Next Page
Loading...
