Par. No. Name Range Default Unit
P0800 Parameter upload from inverter to operator panel 0 - 1 0 --
With this parameter, you can upload parameters from an inverter to the operator panel.
Possible settings:
0 Disabled
1 Upload
P0801 Parameter download from operator panel to inverter 0 - 1 0 --
With this parameter, you can download parameters from the operator panel to an inverter.
Possible settings:
0 Disabled
1 Download
Parameter list
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number) 89
To Next Page
Loading...
