Commissioning
4.7 Basic parameterization of the drive objects
Commissioning with Startdrive
174 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Overview
Infeed units (Line Modules)
Line Modules contain the central line infeed for the DC link. Various Line Modules can be
selected to address the various application profiles:
● Basic Line Modules (BLM)
● Smart Line Modules (SLM)
● Active Line Modules (ALM)
Basic parameterization of the infeed unit
Define the following data in the basic parameterization of the infeed unit:
● Function modules
● Line data/operating mode
● Enable logic
● Line contactor control
1. In the project navigation, select menu "Infeed_x > Parameter".
The corresponding detailed view is displayed at the right.
2. In the secondary navigation, call menu "Basic parameterization > xxx" (xxx stands for the
name of the particular detailed screen form).
The detailed view is updated.
To Next Page
Loading...
Need help?
General