Diagnostics
5.3 Diagnostics via Startdrive
Commissioning with Startdrive
356 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Selecting a group of control and status words
1. In one of the 2 drop-down lists, select the required group of control and status words.
The corresponding display and interconnection fields are displayed on the side of the
mask on which you made the setting in the drop-down list.
An illuminated LED display means that the appropriate bit of the control or status word is
set.
2. If you want to display the values of several groups next to one another, set the other
desired groups in the other two drop-down lists
In the function view, status parameters with the associated numerical values are displayed in
the "Status parameters" screen form:
Meaning of the instruction
Entire parameter text in long form.
Numeric value of the parameter.
Unit Unit of the parameter.
To Next Page
Loading...
Need help?
General