Commissioning
4.7 Basic parameterization of the drive objects
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
181
Drive axes SERVO drives
4.7.3.1
Overview
Basic parameterization of the drive axes
You can carry out basic parameterization for the following data of the drive axis/axes:
● Function modules
● Control mode
● Important parameters
● Sampling times/pulse frequency
● Enable logic
1. In the project navigation, select menu "Drive axis_x > Parameter".
The corresponding detailed view is displayed at the right.
2. In the secondary navigation, call menu "Basic parameterization > xxx" (xxx stands for the
name of the particular detailed screen form).
The detailed view is updated.
To Next Page
Loading...
Need help?
General