Siemens SITRANS FC330 - Page 113

Note
Bargraph
The bargraph limits are defined as the lower and upper alarm values.
One value and graph
2
1
3
① Process Value
② Graph
③ Instruction Press to freeze/unfreeze display
Six values
2
4
1
3
)&66
5
6
① First process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
② Second process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
③ Third process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
④ Fourth process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
⑤ Fifth process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
⑥ Sixth process value The user-defined process value to be displayed is configured in menu
2 "Setup" → 2.8 "Local Display" → 2.8.5 ... 2.8.10 "View" (1-6).
Operating
7.1 Local operation (HMI)
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 113