Siemens SITRANS FC330 - Page 238

Level 1 Level 2 More information
No. Name No. Name
2 Setup 2.1 Sensor Menu item 2.1: Sensor (Page 239)
2.2 Process values Menu item 2.2: Process values
(Page 239)
2.3 Totalizers Menu item 2.3: Totalizers (Page 243)
2.4 Inputs and outputs Menu item 2.4: Inputs and outputs
(Page 244)
2.5 Dosing Menu item 2.5: Dosing (Page 251)
2.7 Date and time Menu item 2.7: Date and time
(Page 256)
2.8 Local display Menu item 2.8: Local display (Page 257)
3 Maintenance & Diagnostics 3.1 Identification Menu item 3.1: Identification (Page 259)
3.2 Diagnostic events Menu item 3.2: Diagnostic events
(Page 260)
3.3 Maintenance Menu item 3.3: Maintenance (Page 261)
3.4 Diagnostics Menu item 3.4: Diagnostics (Page 261)
3.5 Peak values Menu item 3.5: Peak values (Page 263)
3.6 Charateristics Menu item 3.6: Characteristics
(Page 263)
3.7 SensorFlash Menu item 3.7: SensorFlash (Page 264)
3.8 Simulation Menu item 3.8: Simulation (Page 265)
3.9 Audit trail Menu item 3.9: Audit trail (Page 266)
3.10 Self test Menu item 3.10: Self test (Page 266)
3.11 Resets Menu item 3.11: Resets (Page 267)
3.12 Firmware update Menu item 3.12: Firmware update
(Page 267)
4 Communication 4.1 USB (Service channel)
4.2 HART (CH 1)
4.3 Modbus (CH 1)
4.4 Profibus DP/PA
5 Security 5.1 Change user PIN
5.2 Change expert PIN
5.3 Recovery ID
5.4 PIN recovery
5.5 Activate user PIN
5.6 Deactivate user PIN
5.7 Auto logout
5.8 Logout
6 Language
HMI menu structure
C.1 Main menu
SITRANS FC330
238 Operating Instructions, 01/2019, A5E44030648-AB