Siemens SITRANS FC330 - Page 250

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.4.5.7 Pulse output 2.4.5.7.1 Process value
2.4.5.7.2 Flow direction
2.4.5.7.3 Pulse units
2.4.5.7.4 Amount
2.4.5.7.5 Pulses per amount
2.4.5.7.6 Pulse width units
2.4.5.7.7 Pulse width
2.4.5.7.8 Polarity
2.4.5.7.9 Fail-safe behavior
2.4.5.7.10 Fail-safe value
2.4.5.7.11 Fail-safe minimum duration
2.4.5.8 Digital output 2.4.5.8.1 Mode
2.4.5.8.2 Sensor alarms (group 1)
2.4.5.8.3 Sensor alarms (group 2)
2.4.5.8.4 Process alarms (1)
2.4.5.8.5 Process alarms (2)
2.4.5.8.8 Totalizers alarms
2.4.5.8.9 Device alarms
2.4.5.8.10 Channel 1 alarms
2.4.5.8.11 Input/output alarms (1)
2.4.5.8.13 Simulation alarms (1)
2.4.5.8.14 Simulation alarms (2)
2.4.5.8.15 Alarm class
2.4.5.8.16 NAMUR status signal
2.4.5.8.17 Polarity
2.4.5.8.18 On-delay
2.4.5.8.19 Off-delay
2.4.5.9 Digital input 2.4.5.9.1 Input function
2.4.5.9.2 CH1 forced current value
2.4.5.9.3 CH2 forced current value
2.4.5.9.4 CH3 forced current value
2.4.5.9.5 CH4 forced current value
2.4.5.9.6 Debounce time
2.4.5.9.7 Polarity
HMI menu structure
C.5 Menu item 2.4: Inputs and outputs
SITRANS FC330
250 Operating Instructions, 01/2019, A5E44030648-AB