Siemens WEBUI - Figure 5-11 GCP 4000 OCCN Log; Figure 5-12 GCP 5000 OCCN Log

CALIBRATION & ADJUSTMENT
5-8
SIG-QG-20-02 JANUARY 2021
Version : A.2
Figure 5-11 GCP 4000 OCCN Log
Figure 5-12 shows the OCCN log from the GCP 5000, the OCCN value is recorded for each entry. If
multiple parameters are changed on Web UI then save pressed, the OCCN is only logged once for those
changes.
Figure 5-12 GCP 5000 OCCN Log