Silca Triax Quattro - General Warnings and Safety; General Usage Guidelines; Machine Handling Guidelines

Operating Manual - English Triax QUATTRO
- 6 - Copyright Silca 2011
1
GENERAL WARNINGS
Triax QUATTRO is designed in observance of the principles of European Standards (CE).
Right from the design stage solutions are adopted to eliminate hazards for the operator at all stages of use:
transport, regulation, use and maintenance.
The materials used for the machine and the components employed in the use of the Triax QUATTRO are not
hazardous and make the machine comply with current standards.
Silca S.p.A. has also experimented and applied many technical solutions that allow its key-cutting machines to
optimize the quality of the cut keys.
To ensure these results over time, observe the following instructions:
 Observe the procedures described in this manual;
 Use only Silca Original Tools as they are designed to achieve the best performance of the Triax
QUATTRO and quality key-cutting;
 Use Silca key blanks, manufactured in top quality materials;
 Periodically have the key-cutting machine serviced by an authorized Silca Service Centre (list at the end
of this manual);
 Use only Silca Original Spares. Beware of imitations!