SECTION 6
2120 INTERFACE
INTRODUCTION
The 2120 Interface Option allows the 2120 to communicate with the NDU.
NOTE: If a 2120 interface is configured, a maximum of 2000 network points can be annunciated, instead of 2500
points.
2120 INTERFACE OPERATION DURING Walk TestTM
Status changes occurring as a result of a Walk TestTM
operation in a network system are not communicated to the
212C system. Status changes from 2120 Interface points are
not
included in a Walk TestTM group. The Walk TestTM
is strictly a local panel operation.
NOTE:
WalkTestTM does not apply to the NDU as there are NO local points and WalkTestTM is not supported across
the network.
31
To Next Page
Loading...
