2. Press the <NEXT> key. The following is displayed:
I
Press <NEXT> or <PREVIOUS> to scroll
Set Time and Date?
3. Press the <ENTER> key. The current time and date information is displayed along with instructions:
I
Press <FUNC> to change time and date
18:15:43
MON 7 DEC 92
I
4. Press the <FUN& key. The cursor, current time and date, and function key definitions are displayed:
Fl=Left F2=Right
F3=Inc F4=Dec
18:X:43 MON 7 DEC 92
-
I
1
T
CURSOR
NOTE:
The cursor is positioned under the hour. Function key Fl moves the cursor left. Function key F2
moves the cursor right. Function key F3 increases the data above the cursor. Function key F4
decreases the data above the cursor.
5. Use the required function key to position the cursor under the data to be changed (hour, minutes, date of
month, month, and year). Day of week and seconds of time are set by the system. Time entered does not
start until the <ENTER> key is pressed.
6. Use Function key F3 or F4 to increase or decrease data, as required.
7. When time and date are correct, press the <ENTER> key. The display shows the updated time and date.
The time entered does not start until the <ENTER> key is pressed.
I
I
Press <FUN0 to change time and date
18:30:00 MON 7 DEC 92
I
HOW TO ESCAPE FROM THE MENU
To leave the menu, do the following procedure.
1. Press the cCLR> key. The following is displayed:
I
Press <NEXT> or <PREVIOUS> to scroll
Select a List of Points?
I
57
To Next Page
Loading...
