Simrad GC80 - Page 60

Simrad GC80/85 Double System Controller
60
988-12721-001
SWITCH DEFAULT FUNCTION DESCRIPTION
S12-5
OFF
NO.1 gyrocompass serial
output setting
Output port: DGCIF board, TB23 "25TX+/-", NO.1
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S12-6
OFF
NO.1 gyrocompass serial
output setting
Output port: DGCIF board, TB23 "26TX+/-", NO.1
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S12-7
OFF
NO.1 gyrocompass serial
output setting
Output port: DGCIF board, TB23 "27TX+/-", NO.1
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S12-8
OFF
NO.1 gyrocompass serial
output setting
Output port: DGCIF board, TB23 "28TX+/-", NO.1
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-1 OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "13TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-2
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "14TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-3
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "15TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-4
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "16TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-5
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "17TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-6
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB21 "18TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-7
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB22 "19TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)
S21-8
OFF
NO.2 gyrocompass serial
output setting
Output port: DGCIF board, TB22 "20TX+/-", NO.2
OFF = IEC61162-1 ed.4 output (4800 bps)
ON = IEC61162-2 ed.1 output (38400 bps)