Singer 560 - Page 96

(1)
0
12. Hang the knot of the three yarns between both needle
beds at the left side. Insert Hook Tool from underneath
and catch the knot.
13 . Hook the knot on Weight Hook suspended on Cast-on
Comb.
Hook yarn B on Holder B, yarn Con Holder C and yarn
0 on Holder 0 respectively.
(Arrange the yarns so that they are not entangled with
Sinker Posts .)
14. Arrange Holders as follows.
- 92 -
(1) Push Holder Button A. The Holder is positioned in
the CD position.
(2) Push Feeding Lever to the left to bring out Holde r
A
to the ® position.
(3) Push Holder Button B. Holder is positioned in the
CD position .
(3)