Sirona C3 Plus - Page 79

Sirona Dental Systems GmbH 12 Assistant element
C3
+
12.5 Satelec Mini LED curing light
59 06 404 D 3390
D 3390.201.01.18.02
79
Installation
• in the assistant element, holder 1
Handpiece and accessories
1. Handpiece
2. Light guide
3. Supply cable
4. Status LEDs
5. Glare shield
6. ON / OFF switch
7. Function button
Operating modes
The Mini LED has three different modes. To select the
desired menu, press the function button.
4.1 Status LED
The status LED signals the following states:
4.2 Quick curing mode
In this mode the Mini L.E.D. works at full power for
10 seconds.
LED 4.2 shows your selection.
In this mode, the light intensity output is approximately
as follows:
• 1,100 mW/cm² (± 10 %) with the standard light
guide, dia. 7.5 mm.
• 2,000 mW/cm² (± 10 %) with the optional booster
light guide, dia. 5.5 mm.
S
0
134°C 274°F
1
3
5
2
4
6
7
4.1
4.2
4.3 4.4
Color Mode
Green Normal operation
Red, flashing Overheat protection
0 510
Sec.