60
10 Cleaning
WARNING
Risk of fatal electric shock
Cleaning work may only be performed on
products that have been de
-energized first.
When cleaning electrical components, be
mindful of the IP enclosure rating.
WARNING
Serious injury from contact with or
inhalation of hazardous
substances
Wear personal protective equipment.
Observe the safety data sheet (SDS) of the
hazardous substance. Avoid contaminating
other objects or the environment during
cleaning.
10.1 Basics
Cleaning should be carried out in accordance with the
operator's own company rules, and cleaning agents and
devices and the personal protective equipment to be
used should likewise be selected in accordance with
those rules. Only cleaning agents compatible with the
materials may be used for cleaning. Completely remove
any cleaning agent residue left on the product and rinse
with clear water. Unauthorized persons must be kept
away. Use signage to indicate wet areas.
10.2 Interior cleaning
The interior normally does not need to be cleaned. The
interior of the product must be cleaned if incorrect or
contaminated lubricant accidentally enters the product.
Please contact our Service department.
10.3 Exterior cleaning
Do not allow any cleaning fluid to enter the interior of the
product during cleaning.
If products have ultrasonic sensors, the active sensor
surface must be cleaned with a cloth when it becomes
contaminated.
To Next Page
Loading...
