59
9 Maintenance
Careful and regular maintenance is required in order to detect and remedy possible faults in time. The operator must always
determine the specific intervals according to the operating conditions, review them regularly, and adjust them where
necessary. If necessary, copy the table for regular maintenance activities.
Table
Checklist: Maintenance activities
Mechanical and electrical system connections established correctly
The performance characteristics for the aforementioned connections match the specifications in
the “Technical data”
All components such as lubrication lines and metering devices are correctly installed
Product is protected by a suitable pressure relief valve
No apparent damage, contamination, or corrosion
Any dismantled protective and monitoring equipment is fully reinstalled and functional
All warning labels on the product are present and in proper condition
No unusual noises, vibrations, moisture accumulation, or odors present
No undesired discharge of lubricant (leakages) at connections
Lubricant is fed without bubbles
The bearings and friction points requiring lubrication receive the planned lubricant volume
To Next Page
Loading...
