9
1.3 General behaviour when handling
the product
• Familiarize yourself with the functions and operation of
the product. The specified assembly and operating
steps and their sequences must be observed.
• Keep unauthorized persons away.
• Wear personal protective equipment always.
• Precautionary operational measures and instructions
for the respective work must be observed.
• In addition to these Instructions, general statutory
regulations for accident prevention and environmental
protection must be observed.
• Precautionary operational measures and instructions
for the respective work must be observed. Uncertainty
seriously endangers safety.
• Safety-related protective and safety equipment must
not be removed, modified or affected otherwise in its
function and is to be checked at regular intervals for
completeness and function.
• If protective and safety equipment has to be
dismantled, it must be reassembled immediately after
finishing the work, and then checked for correct
function.
• Remedy occurring faults in the frame of
responsibilities. Immediately inform your superior in the
case of faults beyond your competence.
• Never use parts of the centralized lubrication system or
of the machine as standing or climbing aids.
1.4 Intended use
Supply of lubricants.
The product is intended solely for installation in another
machine.
Use is only permitted within the scope of commercial or
economic activity by professional users, in compliance
with the specifications, technical data, and limits
specified in this manual.
1.5 Persons authorized to use the
product
Operator
A person who is qualified by training, knowledge and
experience to carry out the functions and activities
related to normal operation. This includes avoiding
possible hazards that may arise during operation.
Specialist in electrics
Person with appropriate professional education,
knowledge and experience to detect and avoid the
hazards that may arise from electricity.
Specialist in mechanics
Person with appropriate professional education,
knowledge and experience to detect and avoid the
hazards that may arise during transport, installation,
start-up, operation, maintenance, repair and disassembly.
1.6 Foreseeable misuse
Any usage of the product other than as specified in this
manual is strictly prohibited. Particularly prohibited are:
• Use of non-specified consumables, contaminated
lubricants, or lubricants with air inclusions.
• Use of C3 versions in areas with aggressive, corrosive
substances (e.g., high salt load).
• Use of plastic parts in areas with high exposure to
ozone, UV light, or ionizing radiation.
• Use to supply, convey, or store hazardous substances
and mixtures as defined in the CLP Regulation (EC
1272/2008) or GHS with acute oral, dermal, or
inhalation toxicity or substances and mixtures that are
marked with hazard pictograms GHS01-GHS06 and
GHS08.
• Use to supply, convey, or store Group 1 fluids classified
as hazards as defined in the Pressure Equipment
Directive (2014/68/EU) Article 13 (1) a).
• Use to supply, convey, or store gases, liquefied gases,
dissolved gases, vapors, or fluids whose vapor pressure
exceeds normal atmospheric pressure (1013 mbar) by
more than 0.5 bar at their maximum permissible
operating temperature.
• Use in an explosion protection zone.
• Use without proper securing against excessively high
pressures, in the case of pressurized products.
• Use outside of the technical data and limits specified in
this manual.
To Next Page
Loading...
