SKF P203 - Control, Lubricant, and Additional Specifications

38
4.12.4 Control, lubricant, and additional specifications
P203
X
X
-
LL
X
X
XX
-
123
-
DC
-
11
22
33
44
-
V23
L
SSSS
Control circuit boards (12 V / 24 V):
V10 to V13 or V20 to V23: depending
on the type and function of the control
circuit boards used
Lubricant:
A
Standard grease
(Fuchs
Renocal FN 745)
S
Customized filling
Z
Without lubricant
Additional specifications:
-ADR
For hazardous goods
transportation
-A
Version for USA, adapter with
grease fitting with/without SV
(pressure limiting valve), both
NPT thread, (Europ. cable)
-A+SV
Version for USA, adapter with
grease fitting with SV, both NPT
thread (US cable)
+ZUB.
With customized accessories
NOTE
The control circuit boards V10 to V13 or V20 to V23 have different functionality. However, the following applies to all
circuit boards:
•
The lubrication time can be adjusted using a rotary switch, in 8-second- or 2-minute- increments. In the factory
setting, the switch is in position 3 = 24 seconds or 6 minutes.
•
The pause time can be adjusted using a rotary switch, in 4-minute or 1-hour increments. In the factory setting, the
switch is in position 6 = 24 minutes or 6 hours.