Skyla HB1 - Page 71

6-6
Stage Error Message Error Handling
No Data Matched There is no
Operator ID. Please
create Operator ID.
ID Existed
The Operator ID existed. Please
create another Operator ID.
Recall
No Data Matched There is no historical data within the
system. Please conduct a sample
analysis first in order to accumulate
analysis results within the database.
RS232 communication failure
(Error Code 401)
Please check that the RS232 cable is
correctly connected. If the situation is
not resolved, please contact the
authorized technical support
department.
Test result preparation failure
(Error Code 402)
Please contact the authorized
technical support department.
If the information and troubleshooting steps provided by the system do not resolve your
issue, please record the error message and call a skyla
TM
authorized technical support
technician or authorized distributor. skyla
TM
contact information is as follows:
Telephone: +886-3-611-8511
Fax: +886-3-579-5393
E-mail: support@skyla.com
Website:www.skyla.com
Note: The system parts of the chemistry analyzer require professional handling. Please
do not attempt to disassemble or repair the chemistry analyzer by yourself, as this will
void the warranty. When the chemistry analyzer requires service, please contact a
skyla
TM
technical support technician (or authorized distributor).