NOTE!
4.In a dusty environment, the fusion splicer shall avoid dust.
5.When the fusion splicer is moved from a cold environment to a high
temperature environment, try to have a heating up process to eliminate
condensation.
6.In order to maintain fusion splicer performance and stability, the
machine maintenance in factory is recommended once a year.
7.The fusion splicers are accurately calibrated, try to avoid intense
shock and collision, and use a dedicated carrying case for transportation
and storage.
8.The repair and commissioning of the fusion splicer must be
performed by professional and technical personnel. Incorrect use
methods or undesirable devices can cause bad damage to the
equipment. If a problem occurs, please contact in time the
manufacturer.
★ Exemption clauses:
For alllosses caused by using non-original battery,battery
charger, power adapter and so onnot provided by our company,the
Company will not accept any liability.
★
Symbols and logo
Please give full attention to the safety warning signs used on this
model fusion splicer.
High voltage warning signs: High voltage; no touch.
High temperature warning signs: High temperature; no touch.
To Next Page
Loading...