Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Description of "Auto, Calibrate" splice parameter files
Splice parameter file name is up to 16 characters for users.
There are 4 splice modes: Auto (automatic), Calibrate
(calibration). Normal (General), Special (Special). The last is a
special operation option.
Splice modes corresponding to different fibers have been stored
in the database. The operator can choose the appropriate splice
mode in the database according to different fiber types and copy
it to the user splice modes.
★Warning
"Auto - XX "and "Calibrate - XX" have different range of arc intensity
calibration. Therefore, the fibers in "Auto - XX" and "Calibrate - XX" and the fiber to
be spliced must be same, otherwise, wrong calibration will occur. If more seriously, the
splicing will not be conducted. After the error occurs, under the condition the splicing
is possible, the operator can choose correct fiber for "preheat splicing" so as to correct
mistakes.
To Next Page
Loading...