Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
"Heat time" of the heater of the machine is 20s in each time.
In this model of the splicer, the shrink sleeve can be installed in lower ambient
temperature by "fast heat" function. When selecting "fast heat: open", the heater of
the splicer will always be at "temperature stay: 60 ℃ " thermal equilibrium
condition, effectively reduce the waiting time of the heater in cold start-up. The
user can improve the efficiency of shrink sleeve installation under lower
temperature. This option is designed only for low temperature shrink sleeve
installation. Under normal temperature or high temperature working environment,
"open" is not recommended. Otherwise, this option will reduce the splicer's built-in
lithium battery endurance, so this option is set to "off" in default for this model of
the splicer. The steps of "editing" heating parameter document are as follows:
D.In the window of [select heating parameter files], the operator selects “ ☆ ”
corresponding heating parameter files (such as No. 1) according to heat shrink
sleeve specifications. Press button, "Edit, Export" option window
appears.When the cursor moves to “edit”, click button and come to the
window of "edit heating parameter file". The cursor moves down again to "fast
heat".
To Next Page
Loading...