Prime - 600
48
OBTAINING TEST REPORTS
The Prime ā 600 system has the capacity to directly print out the test results and
save them for later review, by means of the PrimeSync program (for PC), or
save them to recuperate them later on in the equipment console.
Reporting and testing concept
Testing refers to each one of the tests performed, including: the measurements
that are set to be shown on the screen; the time measured; the level injected,
and in general all the adjustments.
Reporting refers to the group of tests under one common heading.
Management of saved tests
By accessing the report menu we can select and recuperate saved tests, delete
them and select the place where they are going to be stored.
To Next Page
Loading...
