SMC Networks Prime-600 User Manual

User Guide
57
Action bar
Open test. This opens one or several tests performed with Prime
– 600 for them to be displayed.
Close test. This closes the test that is displayed on screen. This
action button would be disabled if no test is open.
Prime – 600 programming. This updates the software of the
Prime – 600 equipment, enabling you to select the file to be
updated. It would be enabled if the Primesync is connected in
programming mode.
Prime – 600 maintenance. This opens a new window with the
actions to carry out adjustments and maintenance on the Prime
– 600. A password must be entered to access this window.
Show test preview. This shows a preview of the report
generated with one or several tests open.
Print open test. This permits sending the report with one or
several tests open to a selected printer. If the document with
tests has not been generated, it is created before being sent.
Export to PDF. This generates a report document in PDF format,
with one or several tests open.
Report settings. This opens a new window where certain
options can be modified in the generated reports.

SMC Networks Prime-600 Specifications

General

Brand	SMC Networks
Model	Prime-600
Category	Measuring Instruments
Language	English