Snom HD100 - Page 86

SIP Phone Configuration Guide
- 86 -
Setting:
provisioning.resync_mode
Description:
Sets the mode of the device's provisioning/firmware file check. This determines which
files the device retrieves when the resync process begins.
Values:
config_only, firmware_only, config_and_firmware
Default:
config_and_firmware
Setting:
provisioning.bootup_check_enable
Description:
Enables or disables bootup check for configuration and firmware files.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
provisioning.schedule_mode
Description:
Sets the type of schedule check for configuration and firmware files.
Values:
disable, interval, weekday
Default:
disable
Setting:
provisioning.resync_time
Description:
Sets the interval (in minutes) between checks for new firmware and/or configuration
files.
Values:
0-65535
Default:
0 (OFF)
Setting:
provisioning.weekdays
Description:
Sets the day(s) when the device checks for new firmware and/or configuration files. Enter
a comma-delimited list of weekdays from 0 (Sunday) to 6 (Saturday). For example, 5,6,0
means the provisioning check will be performed on Friday, Saturday and Sunday.
Values:
text string
Default:
Blank
Setting:
provisioning.weekdays_start_hr
Description:
Sets the hour when the device checks for new firmware and/or configuration files.
Values:
0-23
Default:
0
Setting:
provisioning.weekdays_end_hr