Snom HD100 - Page 87

SIP Phone Configuration Guide
- 87 -
Description:
Sets the hour when the device stops checking for new firmware and/or configuration
files.
Values:
0-23
Default:
0
Setting:
provisioning.remote_check_sync_enable
Description:
Enables or disables remotely triggering the device to check for new firmware and/or
configuration files. The file checking is triggered remotely via a SIP Notify message from
the server containing the check-sync event.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
provisioning.crypto_enable
Description:
Enables or disables encryption check for the configuration file(s). Enable if you have
encrypted the configuration file(s) using AES encryption.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
provisioning.crypto_passphrase
Description:
Sets the AES encryption passphrase for decrypting the configuration file(s). Enter the key
that was generated when you encrypted the file.
Values:
Text string
Default:
Blank
Setting:
provisioning.check_trusted_certificate
Description:
Enables or disables accepting only a trusted TLS certificate for access to the provisioning
server.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
provisioning.pnp_enable
Description:
Enables or disables the HD10X checking for the provisioning URL using the Plug-and-
Play Subscribe and Notify protocol.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
provisioning.pnp_response_timeout