Snom M215 SC Bundle - Transferring an Active Call to a Held Call; Blind Transfer

35
v1.01
M215SC User Manual Using the phone
◦ If you selected A new party, you will see the message "Transfer to" on the display (Fig. 2). Enter
the number you want to transfer the call to; the label
DIAL
appears on the screen (Fig. 3). Press
DIAL
or to dial.
%/,1'
/LQH
7UDQVIHUWR

%/,1'
/LQH
7UDQVIHUWR

(1'
/LQH


2QDFDOO

75$16
&DOO
WUDQVIHUUHG
Fig. 2 Fig. 3 Fig. 4
4. When the third party answers, announce the call.
5. If the third party wants to accept the call, press
or
TRANS
. When the call has been transferred, you
will see the "call transferred" message (Fig. 4, above).
Transferring an active call to a held call
1. With a call on hold and a call on the line, press
. The Transfer to screen showing the held call appears
on the display.
&$1&(/ 6(/(&7
7UDQVIHUWR

2. Press
SELECT
. The call is transferred immediately.
Blind transfer
1. Press
. The call is automatically put on hold, and the Transfer to screen appears.
&$1&(/ 6(/(&7
7UDQVIHUWR
$KDQGVHWSDUW\
$QHZSDUW\
2. With A new party highlighted, press
SELECT
.
%/,1'
/LQH
7UDQVIHUWR

3. Press
BLIND
.
DIAL
7