63
v1.01
M215SC User Manual Appendix 1 - Base Station Settings
Firmware Upgrade
Use one of the following methods to update the firmware:
◦ Auto Upgrade. Retrieving a firmware update file from a remote host computer and accessed via a
URL. This central location may be arranged by you, an authorized dealer, or your SIP service provider.
Enter the URL under Firmware Server Settings. Click Update Base Firmware Now and Update Handset
Firmware Now to update immediately.
◦ Manual Upgrade. Using a file located on your computer or local network. No connection to the Internet
is required. Consult your dealer for access to firmware update files. Click Manual Upgrade to view the
page where you can manually upgrade the phone firmware.
Firmware Server Settings Description
Base Firmware URL The URL where the phone base station firmware update file resides. This should be a
full path, including the filename of the firmware file.
Handset Firmware URL The URL where the handset firmware update file resides. This should be a full path,
including the filename of the firmware file.
Server authentication name Authentication username for the firmware server.
Server authentication password Authentication password for the firmware server.
Provisioning settings
Provisioning Server Settings Description
Server URL URL of the provisioning file(s). The format of the URL must be RFC 1738 compliant, as
follows:
"<schema>://<user>:<password>@
<host>:<port>/<url-path>" "<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the port number.
Server authentication name User name for access to the provisioning server
Server authentication password Password for access to the provisioning server
Plug-and-Play Settings Description
Enable PnP Subscribe Select to enable the phone to search for the provisioning URL via a SUBSCRIBE
message to a multicast address (224.0.1.75). The phone expects the server to reply
with a NOTIFY that includes the provisioning URL. The process times out after five
attempts.
DHCP Settings Description
Use DHCP Options Enables the phone to use DHCP options to locate and retrieve the configuration
file. When selected, the phone automatically attempts to get a provisioning server
address, and then the configuration file. If DHCP options do not locate a configuration
file, then the server provisioning string is checked.
Note: Ensure that DHCP is also enabled on the “Basic Network Settings” page.
DHCP Option Priority 1 If DHCP is enabled, sets the DHCP Option priority. Select the highest priority option.
DHCP Option Priority 2 If DHCP is enabled, sets the DHCP Option priority. Select the second highest priority
option.
DHCP Option Priority 3 If DHCP is enabled, sets the DHCP Option priority. Select the third highest priority
option.
Vendor Class ID (DHCP 60) DHCP Option 60 is available to send vendor-specific information to the DHCP Server.
User Class Info (DHCP 77) DHCP Option 77 is available to send vendor-specific information to the DHCP Server.
To Next Page
Loading...
