64
v1.01
M215SC User Manual Appendix 1 - Base Station Settings
Resynchronization Settings Description
Mode Sets which files for which the phone checks. It can check for configuration files,
firmware update files (from the URL entered on the Firmware Server Settings page),
or both.
Note: When checking for both configuration and firmware files, the firmware URL
can be within the config file. This firmware URL takes take precedence over the URL
on the Firmware Server Settings page. It will also update the URL on the Firmware
Server Settings page. This allows you to change the firmware URL automatically.
Bootup Check Sets the phone to check the provisioning URL for new configuration and/or firmware
files upon bootup. The update is applied as part of the reboot process.
Schedule Check: Disable When selected, disables regularly scheduled file checking.
Schedule Check: Interval Sets an interval for checking for updates. After selecting Interval, enter the interval in
minutes between update checks.
Schedule Check: Days of the Week Select to enable weekly checking for updates on one or more days. After selecting
Days of the Week, select the day(s) on which the phone checks for updates.
Start Hour Select the hour of the day on which the phone checks for updates.
End Hour Select the hour of the day on which the phone stops checking for updates.
Use encryption Enables an AES-encrypted configuration file to be decrypted before being applied to
the phone. Select if the configuration file has been secured using AES encryption.
Passphrase If the configuration file has been secured using AES encryption, enter the 16-bit key.
Security Settings
On the Security page you can change the admin and user passwords and enter web server settings and trusted
IPs.
Web Server Settings Description
HTTP Server port Port used by the HTTP server. The default is 80.
Enable Secure Browsing When enabled, the HTTPS protocol is used, and you must select the HTTPS server
port in the next step.
HTTPS Server port Port used by the HTTPS server. The default is 443.
Note: Changing the web server settings will reboot the base station.
Certificates
• Device Certificate. You can upload an optional web server certificate to the base station to establish a
secure connection between phone and server. If a certificate is not available, the base station's self-signed
certificate will be used during the connection transaction.
• Trusted Certificates.
To Next Page
Loading...
