Snom M215 SC Bundle - Call Settings; User Preferences Settings; Handset Settings

58
v1.01
M215SC User Manual Appendix 1 - Base Station Settings
Music on Hold Settings Description
Enable Local MoH Enables or disables a hold-reminder tone that the user hears when a far-end caller
puts the call on hold.
Network Conference Settings Description
Enable Network Conference Enables or disables network conferencing for account x.
Conference URI Enter the URI for the network bridge for conference handling on account x.
Session Timer Settings Description
Enable Session Timer Enables or disables the SIP session timer. The session timer allows a periodic
refreshing of a SIP session using the RE-INVITE message.
Minimum value (secs) Sets the session timer minimum value (in seconds) for account x.
Maximum value (secs) Sets the session timer maximum value (in seconds) for account x.
Call Settings
Each account (1 to 6) has its own call settings page. Click on the account to open it.
General Call Settings Description
Anonymous Call Reject Enables or disables rejecting calls indicated as "Anonymous."
Enable Anonymous Call Enables or disables outgoing anonymous calls. When enabled, the caller name and
number are indicated as "Anonymous."
Do not Disturb Setting Description
Enable DND Turns Do Not Disturb on or o.
Call Forward Settings Description
Enable Call Forward Always Enables or disables call forwarding for all calls on that line. Select to enable.
Target Number Enter a number to which all calls will be forwarded.
Enable Call Forward Busy Enables or disables forwarding incoming calls to the target number if
• the number of active calls has reached the maximum number of calls configured
for account x
• Call Waiting O is selected.
Target Number Enter a number to which calls will be forwarded when Call Forward Busy is enabled.
Enable Call Forward No Answer Enables or disables call forwarding for unanswered calls on that line.
Target Number Enter a number to which unanswered calls will be forwarded.
Delay Select the number of rings before unanswered calls are forwarded.
User Preferences Settings
On this page you can select the language that appears on the WUI.
Handset Settings
On these pages you configure account assignments and names for the handsets registered at the base station.
◦ Account assignment.
- The Account Assignments table lists the maximum of six handsets, even if there a fewer handsets
registered. The registration status of currently registered handsets does not aect what is listed on
this table.