Snom M215 SC Bundle - Contacts; Base Directory Settings; Blacklist (Deny List) Settings; LDAP Settings

60
v1.01
M215SC User Manual Appendix 1 - Base Station Settings
Contacts
Base directory settings
This is the "local" directory on the base station, as opposed to external, server-based directories like LDAP. On
the Base Directory page, you can manage directory entries that will be available on all handsets registered at
the base station. You can sort, edit, delete, and add contact information for up to 200 entries. In order to back
up your contacts or import another local directory file, the page also enables you to export and import the base
directory.
◦ Adding, editing, and deleting entries and page navigation: See "Contacts" on page 60.
◦ For general information on the available directories, see "Directories" on page 40.
Base Directory Settings Description Range Default
First Name Enter the appropriate names in these fields.
The maximum length of the first name and
last name fields is 15 characters.
N/A Blank
Last Name
Ringer Tone Sets a unique ringer tone for calls from this
directory entry.
Auto, Tone 1–10 Tone 1
Account Sets the account used when you dial this
directory entry.
Default Account, Account
1–6
Default Account
Work Number Enter the appropriate numbers in these
fields.
N/A Blank
Mobile Number
Other Number
Blacklist (deny list) settings
Blacklist Settings Description Range Default
First Name Enter the appropriate names in these fields.
The maximum length of the first name and
last name fields is 15 characters.
N/A Blank
Last Name
Account Sets the account used when you dial this
directory entry.
Default Account, Account
1–6
Default Account
Work Number Enter the appropriate numbers in these
fields.
N/A Blank
Mobile Number
Other Number
LDAP settings
LDAP Settings Description
Enable LDAP When enabled, LDAP is available in the handsets' directory menu
Directory Name LDAP directory name
Server Address IP address of the LDAP server
Port Server port for LDAP
Version Select the LDAP protocol version supported on the phone. Ensure the protocol value
matches the version assigned on the LDAP server.
Authentication Scheme Select the LDAP server authentication scheme.
Authentication Name Enter the user name or authentication name for LDAP server access.
Authentication Password Enter the authentication password for LDAP server access.